License Plate Bracket Install

Tools needed
1. 7/16 open end wrench or small crescent wrench

Step 1. Bracket can be mounted anywhere onthe 2nd lower grill. It's recommended that you mount bracket on the lower grill assembly because mounting bolts are out of view and license plate is where the factory mounting holes were. You can also mount it to the left or right side of the bumper.

Note: tC models require plastic shield removal

Step 2. Notice that their are 2 washers on each ancor bolt. One for the outside of the grill, and the other for the rear inside of the grill.

Note: Adjustment of nuts are require to get proper spacing between plate and bumper

Step 3. When you have correct adjustment, tighten the outer nut to a snug fit, be careful to not tighten the nut too tight, due to grills ability to crack.